Flooring for paddocks & outdoor: Rubber mats & surface stabilisation

Our range also includes a broad selection of surface stabilisation or rubber mats for your paddocks / turn-out areas. Installing our products will give you a non-slip and easy to clean surface. Within our paddock range, we have two types of flooring. Firstly, rubber matting without any additional tread layer (sand layer), and secondly, grid stabilisation systems with a tread layer. Muddy ground will be a thing of the past.

QUICK-NAVI:

Before

After



Without a tread layer (no sand layer required)


SAGUSTU-elastic-composite paving stones

Our interlocking paving stones are ideal for open areas! They retain their non-slip properties, even when wet. Weather and frost-resistant! Installation also possible on non-concrete surfaces.

 

Measurements:

  • Size: 20 cm x 16.5 cm (each stone)
  • 35 stones cover 1m²
  • Thickness: 43 mm
  • Colour: reddish-brown, black or green
  • Upper surface: open pore structure, compressed incl. fibres
  • Underside: open pore structure, compressed incl. fibres
  • Half-stones and edges also available

Subsurface:

can be laid on concrete, concrete paving or a bed of gravel / chippings (firm and level). There should be a slope of around 2-3 % and a drain.

 

We recommend fixings around the edges to prevent slipping.

 

Information on cutting can be found here.



SAGUSTU-elastic-composite paving mat

Our interlocking paving mats are weather and frost-resistant. Their size means that they are quick to install and easy to care for. Attractive appearance with mock joints on the surface. The lobes on the sides of the mats prevent them from sliding against each other.

 

Tip:

 

The 43 mm interlocking paving mats and interlocking paving stones can be combined. Depending on the area to be covered, this means significantly less cutting and lower installation costs.

 

Measurements:

  • Size: 1.00 m x 1.12 m
  • Thickness: 43 mm, 30 mm and 17 mm
  • Colour: reddish-brown, black or green
  • Top surface: ring matting
  • Underside: drainage grooves (43 mm + 30 mm)
  • Underside: smooth (17 mm)
  • Mats lock together

Subsurface:

can be laid on concrete, concrete paving or a bed of gravel / chippings (firm and level). There should be a slope of around 2-3 % and a drain.

 

We recommend fixings around the edges to prevent the rubber mats from slipping.

 

Information on cutting can be found here.



SAGUSTU-elastic mat with connection pins

The SAGUSTU Elastic mats with connecting pins have large, square pimples on the underside and are therefore ideal for installation on gravel / chippings (firm and level). The connecting pins help to ensure that the mat joints do not separate. Open-pored surface and therefore non-slip and water- and urine-permeable.

 

Measurements:

  • Size: 0.50 m x 0.50 m
  • Incl. 8 connecting pins per mat
  • Thickness: 40 mm
  • Colour: reddish-brown
  • Top surface: no pattern
  • Underside: rectangular drainage system

Subsurface:

can be laid on concrete, concrete paving or a bed of gravel / chippings (firm and level). There should be a slope of around 2-3 % and a drain.

 

We recommend fixings around the edges to prevent the rubber mats from slipping.

 

Information on cutting and care can be found here.



SAGUSTU-DK-stable mat (without stilts)

These DK stable mats are smooth on both sides, without pimples on the underside, making them especially suited for installation on gravel / chippings (firm and level). These mats are also suitable for use on slatted floors. Open-pored surface and therefore non-slip and water- and urine-permeable

 

Measurements:

  • Size: 1.00 m x 1.00 m
  • Thickness: 30 mm
  • Colour: reddish-brown or black
  • Top surface: no pattern
  • Underside: no pattern

Subsurface:

non-concrete surface, such as a bed of gravel / chippings (firm and level) or even a slatted floor. There should be a slope of around 2-3 % and a drain.

 

We recommend fixings around the edges to prevent the rubber mats from slipping.

 

Information on cutting and care can be found here.



SAGUSTU-rubber wedge

The SAGUSTU Rubber Wedge provides an unimpeded transition. The Rubber Wedge helps to avoid tripping.

 

Measurements:

  • A choice of measurements is available:

       - 0.50 m x 0.13 m x 40 mm

      - 0.50 m x 0.20 m x 43 mm

  • Colour: reddish-brown or black
  • Top surface: no pattern
  • Underside: no pattern

Subsurface:

can be installed on concrete or concrete paving (solid surface).

 

Mounting:

 

May be glued or screwed. When using screws, washers should be used to ensure that the screws do not pull through the rubber.



With a tread layer - sand layer required


SAGUSTU-allround-paddock and riding area slabs (made from plastic)

Our Allround plastic paddock and riding arena tile is a proven means of stabilising the ground outdoors.

  • can be installed without subbase
  • water-permeable
  • stable and strong with a high load capacity (depending on subsurface)
  • easy installation
  • removable without leaving a residue

The ease of handling the individual tiles means that you can easily cover large areas in a short time.

 

Measurements:

  • Size: 0.50 m x 0.50 m
  • 4 tiles cover 1 sqm (incl. expansion joints)
  • Thickness: 53 mm
  • Interlocking on all 4 sides
  • Surface: perforated
  • Underside: grid

        - can be installed either way up -

 

Subsurface:

Suitable for installation on the natural ground as well as sand, gravel or directly onto mud. The surface should be levelled with a slope of around 1%.

 

We recommend fixings around the edges to prevent slipping.

 

Information on cutting can be found here.


SAGUSTU FlexPro (made from plastic)

Mixing the footing layer and sub-base is a thing of the past. The SAGUSTU FlexPro mat serves as a separation layer and drainage mat for paddocks and riding areas. The mat is characterised by quick laying with large slabs, which significantly reduces the laying time and the associated laying costs. The SAGUSTU FlexPro mat can be used both as an attachment in the paddock area and on a riding area. These mats are also suitable for trotting and gallop racing tracks as well as in indoor riding arenas (also on concrete floors). A sand layer is required as a tread layer and the mats should be laid with an expansion joint.

 

Characteristics:

  • water permeable
  • no surface sealing
  • weather resistant
  • high stability and resilience
  • UV resistant and frost-proof

Dimensions:

  • Size: 1.25m x 0.8m (per panel)
  • Cover size: 1 sqm
  • Thickness: 40 mm
  • Colour: black
  • Weight: 18,5 kg
  • Pallet content: 50 panels = 50 sqm

Substrate:

The existing substrate must be removed, the grass seam must be removed. In addition, a subgrade of approx. 2-3% should be considered. Then a water-permeable gravel layer of 10-25 cm (depending on the subsoil) is to be applied. The laying bed of crushed chippings 8/11 mm should be approx. 3-5 cm high. Now the FlexPro mats are laid. Finally, the footing layer (approx. 10-12 cm, depending on the area of use) of water-permeable sand is applied.

 

We recommend an edge fixation to avoid slipping.

 

Information on cutting can be found here.



SAGUSTU-perforated matting for paddocks and riding areas (made from plastic)

SAGUSTU perforated mats are made of flexible PVC. The main function of these mats is to provide shock absorption and secure footing for your horse. Furthermore, these perforated mats save water and drain surplus rainwater away effectively.

 

Measurements:

  • Size: 1.17 m x 0.85 m
  • Coverage incl. expansion joints approx. 1 sqm
  • Thickness: 50 mm
  • Surface: Pimples incl. water reservoir
  • Underside: rings
  • No special joining system, installation: edge to edge

Subsurface:

 We recommend planing off the topsoil and compacting the subsoil to create a slight slope of around 1.5 %. Next, a water-permeable gravel layer should be laid. Now add a levelling and drainage layer of chippings (8-16 mm diameter). This layer should be around 5 cm thick. Now you can start to lay the SAGUSTU perforated mats. We recommend filling them with filter grit (2-5 mm diameter) or similar. Lastly, add the tread layer of water-permeable sand.

 

We recommend fixings around the edges to prevent slipping.

 

Information on cutting can be found here.



SAGUSTU-perforated mat for paddocks and riding area with tongue and groove (made from plastic)

SAGUSTU paddock and riding arena matting is wear-resistant, weather-proof, water-permeable and has a shock-absorbing effect. Ideal for surface stabilisation on a gravel base. The rings on the underside ensure that it conforms well to the surface beneath it. This surface requires a layer of sand as a tread layer.

 

Measurements:

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.16 m x 0.76 m, 1 mat = 0.89 sqm
  • Thickness: 43 mm
  • Surface: perforated
  • Underside: rings
  • Tongue and groove system on four sides

Subsurface:

The existing subsurface must be removed along with grass roots to create a level surface with a maximum slope of around 1 %. Next, a 10-25 cm thick (depending on the underlying soil), water-permeable gravel layer should be laid. The bedding layer of broken chippings should be around 3-5 cm thick. Now you can start to lay the paddock and riding arena mats. Lastly, add the tread layer of water-permeable sand.

 

We recommend fixings around the edges to prevent the rubber mats from slipping.

 

Information on cutting can be found here.