Waterproof rubber mats for open barns and loose stables


Use our waterproof rubber mats in your open barns and loose stables if the surface is level and solid (concrete or paving). A slope is not necessary. We only recommend the use of waterproof rubber mats in open barns and loose stables if there is a roof or protection from the rain, otherwise the mats cannot function properly.




Eldorado-air cushion mat with tongue and groove

Our Eldorado air cushion mats are ideal for the bedding areas of your open barns and loose stables.

 

Measurements:

 

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.17 m x 0.77 m, 1 mat = 0.90 sqm
  • Thickness: 30 mm
  • Colour: black
  • Surface: Hammer groove profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

Subsurface:

 

The subsurface must be level and sealed, concrete or paving. No incline needed.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent the rubber mats from slipping. 

 

Information on cutting can be found here.



Eldorado-Puzzle mat with horse head profile

The Eldorado interlocking mat can be joined so well that it creates an almost seamless covering. This provides the perfect flooring for your horse.

 

 

Measurements:

 

  • Available in two different sizes
  • Thickness: 16 mm
  • Colour: black
  • Top surface: Horse’s head profile
  • Underside: Groove profile
  • Interlocking joint system
  • Depending on the area there is hardly any wastage thanks to the addition of half Eldorado interlocking mats (0.50 m x 1.00 m)

Mat sizes available:

 

  • 1.00 m x 1.00 m (Interlocking system on 4 sides)
  • 0.50 m x 1.00 m                                       (interlocking system on 3 sides - 1 long side without interlocking tabs)

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

 

Subsurface:

 

The subsurface must be level and sealed, concrete or paving. No incline needed.

 

Information on cutting can be found here.

 

 

Low emissions product see Test PDF



SAGUSTU-Duplex stable mat

The hammered surface profile and grooves on the underside make our Duplex mats a non-slip and flexible rubber mat that is quick and easy to install in covered open barns.

 

Measurements:

 

  • Available in a choice of sizes
  • Thickness: 18 mm
  • Colour: black
  • Surface: coarse, hammered profile
  • Underside: broad, grooved profile
  • No special joining system, installation: edge to edge

Mat sizes available:

 

  • 1.00 m x 1.50 m
  • 1.00 m x 1.65 m
  • 1.25 m x 1.65 m
  • 1.20 m x 1.75 m
  • 1.20 m x 2.20 m
  • 1.20 m x 2.50 m

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

Subsurface:

 

The subsurface must be level and sealed, concrete or paving. No incline needed.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent the rubber mats from slipping. 

 

Information on cutting can be found here.



Sagustu-rhomb stable mat

Our Diamond stable mats are a non-slip and insulating rubber mat that is quick to install thanks to its edge to edge system.

 

Measurements:

 

  • Available in a choice of sizes
  • Thickness: 17 mm
  • Colour: black
  • Top surface: small diamond pattern
  • Underside: smooth
  • No special joining system, installation: edge to edge

Mat sizes available:

 

  • 1.00 m x 1.50 m
  • 1.00 m x 2.00 m
  • 1.22 m x 1.83 m

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

Subsurface:

 

The subsurface must be level and sealed, concrete or paving. No incline needed.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent the rubber mats from slipping.

 

Information on cutting can be found here.



Sagustu-universal stable mat

The pimpled surface profile of the Universal mat gives excellent grip and also makes cleaning easy.

 

Measurements:

 

  • Size: 1.22 m x 1.83 m
  • Thickness: 17 mm
  • Colour: black
  • Top surface: Pimpled profile
  • Underside: Groove profile
  • No special joining system, installation: edge to edge

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

Subsurface:

 

The subsurface must be level and sealed, concrete or paving. No incline needed.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent the rubber mats from slipping.

 

Information on cutting can be found here.



Plastic flooring with tongue and groove


SAGUSTU-solid stable flooring (made from plastic) with tongue and groove

This stable flooring is even ideal for use on non-concrete surfaces. However, it can only be used in completely covered areas; the plastic may become slippery when wet!

 

Measurements:

 

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.16 m x 0.76 m, 1 mat = 0.89 sqm
  • Thickness: 24 mm
  • Colour: Anthracite
  • Surface: Pimpled profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent slipping.

 

Information on cutting can be found here.



SAGUSTU-solid stable flooring (made from plastic) with tongue and groove

The 43 mm SAGUSTU stable flooring is perfect for stabilising non-concrete surfaces. Its thicker structure makes it ideal for heavier loads. Please us only in covered open barns; the plastic may become slippery when wet!

 

Measurements:

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.16 m x 0.76 m, 1 mat = 0.89 sqm
  • Thickness: 43 mm
  • Colour: anthracite
  • Surface: Pimpled profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

  

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent slipping.

 

Information on cutting can be found here.



SAGUSTU-solid stable flooring for high load(made from plastic) with tongue and groove

Our heavy duty stable flooring can also be used on non-concrete surfaces and can stand up to heavy loads. We recommend that this is only used in covered areas, as plastic can become slippery when wet!

 

Measurements:

 

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.16 m x 0.76 m, 1 mat = 0.89 sqm
  • Thickness: 43 mm
  • Colour: anthracite
  • Surface: Pimpled profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent slipping.

 

Information on cutting can be found here.



SAGUSTU-solid stable flooring (made from plastic) without tongue and groove

The 12 mm thick stable flooring can be used to protect your wooden or concrete floors. Horses stand on a more supportive surface than concrete. As with all waterproof coverings, we recommend using only in covered areas. Plastic can become slippery when wet!

 

Measurements:

 

  • Size: 1.20 m x 0.80 m
  • Thickness: 12 mm
  • Colour: anthracite
  • Surface: Pimpled profile
  • Underside: smooth
  • No special joining system, installation: edge to edge

Bedding recommendations:

 

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

 

We recommend fixings around the edges (e.g. wooden or aluminium rail) to prevent slipping.

 

Information on cutting can be found here.