Ramp mats for horse trailers/trucks
Ramp mats for horse trailers/trucks
Our SAGUSTU ramp mats ensure safe loading of your horses, especially for young horses without much experience. The integrated treads serve as anti-slip protection when loading and unloading your horses.
Our product range includes a wide variety of ramp mat dimensions, so we can always offer you the right ramp mat for every trailer type, with as little waste as possible. Custom cuts are also available.
SAGUSTU ramp mat
Standard ramp mats with normal strip:
1.00 m x 1.55 m (strip length = 1.00 m)
1.40 m x 1.20 m (strip length = 1.40 m)
1.60 m x 1.25 m (strip length = 1.60 m)
1.65 m x 1.40 m (strip length = 1.65 m)
1.75 m x 1.55 m (strip length = 1.75 m)
Standard ramp mats with high bar:
1.65 m x 1.40 m (strip length = 1.65 m)
1.80 m x 1.55 m (strip length = 1.80 m)
2.00 m x 1.55 m (strip length = 2.00 m)
2.00 m x 2.30 m (2-part) (strip length = 2.00 m)
2.20 m x 2.20 m (2-part) (strip length = 2.20 m)
2.40 m x 1.20 m (strip length = 2.40 m)
2.50 m x 1.55 m (strip length = 2.50 m)
Maxi ramp mat with middle bar
2.40 m x 2.10 m (1-piece) (strip length = 2.40 m)
Further dimensions on request!
Laying:
We generally recommend gluing the ramp mats over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber coverings (except for rubber coverings with a fabric backing) and the existing subfloor must be sufficiently roughened! Alternatively, you can also screw or rivet the ramp mat covering.
SAGUSTU dirt lock
Product description
The SAGUSTU mudguard serves as a transition rubber between the van floor and the tailgate. It is a high-quality, flexible EPDM rubber covering without an insert.
Dimensions
Thickness: 4 mm
Color: black
Weight: 5.5 kg/m²
Roll: 1.20 m wide, 10 m long
Roll cutting possible
Dimensions
Thickness: 4 mm
Color: black
Weight: 5.5 kg/m²
Roll: 1.20 m wide, 10 m long
Roll cutting possible
Rectangular cuts
0.30 m x 1.75 m
Further dimensions on request.
Laying:
We generally recommend gluing the ramp mats over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber coverings (except for rubber coverings with a fabric backing) and the existing subfloor must be sufficiently roughened! Alternatively, you can also screw or rivet the ramp mat covering.