Rubber flooring for horse trailers/trucks
Rubber flooring for horse trailers/trucks
For optimal comfort and safety of your horse during transport, we recommend equipping your horse trailer or truck with a SAGUSTU rubber mat or our rubber floor screed.
By using our products, you are guaranteed a safe stand while driving.
We offer seamless rubber mats up to 2.50 m wide, especially for trucks or larger vans.
SAGUSTU rubber mat with fabric pattern on both sides
Product description
Fabric-patterned surface, fabric-patterned underside. Water and urine impermeable, slip-resistant and easy to install and cut.
Dimensions
Strength:
6 mm / 9 kg/m²
8 mm / 12 kg/m²
Roll goods
without deposit
Color: black
Roll width: up to 2.00 m
Roll length: up to 21 m
Roll cutting possible.
Rectangular cuts standard
6mm thick:
1.35 m x 3.00 m
1.65 m x 3.00 m
1.75 m x 3.00 m
laying
We generally recommend gluing rubber flooring for horseboxes or trucks over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber flooring (except for rubber flooring with a fabric backing) and the existing subfloor must be sufficiently roughened.
Various roll widths and lengths available from stock.
Standard rectangular cuts minimize waste.
SAGUSTU solid rubber mat, hammer finish
Product description
Hammered surface, smooth underside, water and urine impermeable, slip-resistant, easy to clean and easy to install and cut.
Various roll widths and lengths available from stock. Standard rectangular cuts minimize waste.
Individual dimensions available on request (also with insert)!
Dimensions
Thickness: 8 mm/ 10.5 kg/m²
(other thicknesses available with corresponding delivery time)
Roll goods
without fabric or interlining
Color: black
Roll width: up to 2.00 m
Roll length: up to 30 m
Roll cutting possible.
Rectangular cuts standard
1.35 m x 3.00 m
1.65 m x 3.00 m
1.75 m x 3.00 m
1.80 m x 3.20 m
2.00 m x 3.00 m
2.00 m x 4.00 m
2.00 m x 5.00 m
2.00 m x 6.00 m
2.00 m x 7.00 m
2.00 m x 8.00 m
2.00 m x 10.00 m
2.00 m x 12.00 m
Laying:
We generally recommend gluing rubber flooring for horseboxes or trucks over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber flooring (except for rubber flooring with a fabric backing) and the existing subfloor must be sufficiently roughened.
Various roll widths and lengths available from stock.
Standard rectangular cuts minimize waste.
Available on request:
• Rolls or rectangles with insert
• Individual dimensions
• Different lengths possible by cutting
SAGUSTU solid rubber mat - extra wide 2.50m
Product description
Hammered surface, fabric-patterned underside, water- and urine-impermeable, slip-resistant, easy to clean, and simple to install.
Dimensions
Thickness: 8 mm / 10.5 kg/m²
(other thicknesses available with corresponding delivery time)
Roll goods
without fabric or interlining
Color: black
Roll width: 2.50 m
Roll length: other lengths on request
Rectangular cuts standard
2.50 m x 3.00 m
2.50 m x 4.00 m
2.50 m x 5.00 m
2.50 m x 6.00 m
2.50 m x 7.00 m
2.50 m x 10.00 m
We generally recommend gluing rubber flooring for horseboxes or trucks over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber flooring (except for rubber flooring with a fabric backing) and the existing subfloor must be sufficiently roughened.
Various roll widths and lengths available from stock. Standard rectangular cuts minimize waste.
Available on request:
• Rolls or rectangles with insert
• Individual dimensions
Sagustu rubber floor screed
Product description
Seamless installation creates a permanently jointless rubber floor covering that is waterproof and thus optimally protects van and trailer floors from rotting.
Installation is possible on wood, plywood, or metal, as well as other substrates. The existing substrate may need to be pretreated (e.g., aluminum flooring). The surface can be made smoother and more closed-pore using a spiked roller.
Recommended application thickness
In trucks: 20 mm
In the pendant: 15 mm
Contents:
3 components (rubber granulate, natural rubber, binder)
Color black (other colors, or dark green, at extra charge)
Weight approx. 50 kg / pack
Coverage at application thickness of 15 mm: 3 sqm / pack
Coverage at an application thickness of 20 mm: 2.25 sqm / pack
Repair packs are also available with the following coverage at an application thickness of 10 mm:
2 sqm / pack
1 sqm / pack
0.3 sqm / pack (“mini repair kit”)
Please note that SAGUSTU rubber flooring screed is made of natural rubber and is solvent-free. This environmentally friendly consistency means that a limescale film may form at certain humidity levels or due to residual moisture in the subfloor. This can be removed with a standard limescale cleaner. Slight hoof prints in the surface are caused by the squashing of the swollen upper layer of latex. This is important for the horse's stability, but does not damage the surface. Installation instructions will be provided upon delivery of the goods after placing your order.
SAGUSTU rubber mat with fabric pattern on both sides
Product description
Fabric-patterned surface, fabric-patterned underside. Water and urine impermeable, slip-resistant and easy to install and cut.
Dimensions
Strength:
6 mm / 9 kg/m²
8 mm / 12 kg/m²
Roll goods
without deposit
Color: black
Roll width: up to 2.00 m
Roll length: up to 21 m
Roll cutting possible.
Rectangular cuts standard
6mm thick:
1.35 m x 3.00 m
1.65 m x 3.00 m
1.75 m x 3.00 m
laying
We generally recommend gluing rubber flooring for horseboxes or trucks over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber flooring (except for rubber flooring with a fabric backing) and the existing subfloor must be sufficiently roughened.
Various roll widths and lengths available from stock.
Standard rectangular cuts minimize waste.
SAGUSTU solid rubber mat, hammer finish
Product description
Hammered surface, smooth underside, water and urine impermeable, slip-resistant, easy to clean and easy to install and cut.
Various roll widths and lengths available from stock. Standard rectangular cuts minimize waste.
Individual dimensions available on request (also with insert)!
Dimensions
Thickness: 8 mm/ 10.5 kg/m²
(other thicknesses available with corresponding delivery time)
Roll goods
without fabric or interlining
Color: black
Roll width: up to 2.00 m
Roll length: up to 30 m
Roll cutting possible.
Rectangular cuts standard
1.35 m x 3.00 m
1.65 m x 3.00 m
1.75 m x 3.00 m
1.80 m x 3.20 m
2.00 m x 3.00 m
2.00 m x 4.00 m
2.00 m x 5.00 m
2.00 m x 6.00 m
2.00 m x 7.00 m
2.00 m x 8.00 m
2.00 m x 10.00 m
2.00 m x 12.00 m
Laying:
We generally recommend gluing rubber flooring for horseboxes or trucks over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber flooring (except for rubber flooring with a fabric backing) and the existing subfloor must be sufficiently roughened.
Various roll widths and lengths available from stock.
Standard rectangular cuts minimize waste.
Available on request:
• Rolls or rectangles with insert
• Individual dimensions
• Different lengths possible by cutting
SAGUSTU solid rubber mat - extra wide 2.50m
Product description
Hammered surface, fabric-patterned underside, water- and urine-impermeable, slip-resistant, easy to clean, and simple to install.
Dimensions
Thickness: 8 mm / 10.5 kg/m²
(other thicknesses available with corresponding delivery time)
Roll goods
without fabric or interlining
Color: black
Roll width: 2.50 m
Roll length: other lengths on request
Rectangular cuts standard
2.50 m x 3.00 m
2.50 m x 4.00 m
2.50 m x 5.00 m
2.50 m x 6.00 m
2.50 m x 7.00 m
2.50 m x 10.00 m
We generally recommend gluing rubber flooring for horseboxes or trucks over the entire surface. The joints should be sealed with our cartridge (sealant - not silicone!) to prevent moisture from penetrating beneath the mat. Otherwise, the adhesive will lose its adhesion. Immediately before gluing, the rubber flooring (except for rubber flooring with a fabric backing) and the existing subfloor must be sufficiently roughened.
Various roll widths and lengths available from stock. Standard rectangular cuts minimize waste.
Available on request:
• Rolls or rectangles with insert
• Individual dimensions
Sagustu rubber floor screed
Product description
Seamless installation creates a permanently jointless rubber floor covering that is waterproof and thus optimally protects van and trailer floors from rotting.
Installation is possible on wood, plywood, or metal, as well as other substrates. The existing substrate may need to be pretreated (e.g., aluminum flooring). The surface can be made smoother and more closed-pore using a spiked roller.
Recommended application thickness
In trucks: 20 mm
In the pendant: 15 mm
Contents:
3 components (rubber granulate, natural rubber, binder)
Color black (other colors, or dark green, at extra charge)
Weight approx. 50 kg / pack
Coverage at application thickness of 15 mm: 3 sqm / pack
Coverage at an application thickness of 20 mm: 2.25 sqm / pack
Repair packs are also available with the following coverage at an application thickness of 10 mm:
2 sqm / pack
1 sqm / pack
0.3 sqm / pack (“mini repair kit”)
Please note that SAGUSTU rubber flooring screed is made of natural rubber and is solvent-free. This environmentally friendly consistency means that a limescale film may form at certain humidity levels or due to residual moisture in the subfloor. This can be removed with a standard limescale cleaner. Slight hoof prints in the surface are caused by the squashing of the swollen upper layer of latex. This is important for the horse's stability, but does not damage the surface. Installation instructions will be provided upon delivery of the goods after placing your order.