|
|
| |
|
|
| |

|
| |
 |
|
|
|
|
|
Transparent, made from PVC, 3mm thick:
 |
Rolls and pre-cut parts available |
 |
Roll widths: 1.00m, 1.10m, 1.20m, 1.30m and 1.40m |
 |
Cuts possible. |
|
As above, transparent, 5mm thick:
 |
Roll width: 1.10 m |
|
|
|
|
|
| |

|
| |
 |
|
|
|
|
|
Made from rubber with strong, tear-proof EP filler, black, smooth on both sides:
 |
Thicknesses: 4 mm |
 |
Roll widths: 1.00m, 1.20m and 1.30m |
 |
Roll length: 21 m |
 |
Cuts possible from roll widths: 1.00m and 1.20m. |
|
As above, but 8mm thick with no insert:
 |
Rolls at 1.20m wide, 10m long |
 |
Square edge full rolls only |
|
|
|
|
|
| |
|
|
| |
|
|
| |

|
| |
 |
|
|
|
|
|
Using 2 component rubber adhesive you can securely attach the rubber flooring. Bubbles shouldn't form if the flooring is laid according to the instructions. Contact Adhesive is mainly for attaching wall coverings. It's a 1-component adhesive. Cartridge: edges and joins are sealed using this adhesive and sealer (silicon-free!). Roughen the rubber coatings immediately before gluing! A primer may be required, depending on the surface and rubber coating. |
|
|
|
|
|
|